|
 |
SV91M CESG Approved Degausser
Government security approved degausser |
- Features:
- High energy security degausser
Meets CESG Specifications
High energy
Simple to Operate
Compact, Table Top Design
Handles all Magnetic Media Formats
|
- SV91M: High Energy
Degausser
-
- If you require to erase a range of magnetic media including
high density metal tapes and cassettes then the SV91M is up to
the job. The SV91M is quick too, taking as little as ten seconds
to completely erase a cassette. Its simple to use and its compact
table top operation provides a thoroughly effective and low cost
means of degaussing Betacam SP, D2, Mll, DAT, 8mm and other high
coercivity tapes. The SV91M is a compact, low noise, manually
operated unit that sits neatly on a table top and has been designed
very much with Security operations in mind as its powerful degaussing
fields can erase even metal particle tape.
The SV91M is ideal for the security conscious, low volume operator
who wants to have a professional low budget solution to eliminate
magnetic media security risks.
The SV91M degausser is UK government approved to the CESG Degaussing
Standard.
This new Standard, which replaces the SEAP 8500 Degaussing Standard
has two levels of degaussing:
Lower Level - for RESTRICTED and below.
Higher Level - for CONFIDENTIAL and above
Currently the SV91M is approved at the Lower Level. This means
any magnetic media (holding RESTRICTED or less) may be regarded
as NOT PROTECTIVELY MARKED after being degaussed.
The SV91M is subject to S(E)N 06/09. which requires all the SEAP-approved
degaussers to be retested against the new CESG Degaussing Standard
(at the Higher Level). At this time, the testing standard is not
yet available.
The SV91M may still be used to degauss magnetic media at CONFIDENTIAL
and above, but the degaussed media is subject to additional handling
requirements (detailed in S(E)N 06/09).
-
|
| The
SV91M has been approved by the UK Government and meets the specified
requirements of CESG Degausser Standard for the secure erasure and
destruction of information and data stored on magnetic media up to
the restricted and below level. Also meets German security approval
DIN33858. |
| Media
Erased: |
Hard Drives:
3½” and 5¼” PC (Up to 1TB)
DLT Tapes: Super DLT I, II & III, DLT IV-VSL, S-DLT,
LTO Tapes: LT01, LT02, LT03, LT04; LTO5. 9840; 9940
Other media erased:
½” Computer Tape; Diskettes – single/boxed;
DC 600, 2000; TK50, 70, 85, 3480/3490E/3590/3590E; 4mm; 8mm; Exabyte;
Travan; DLT; DAT; ZIP Disk; Ultrium
|
| Power
Requirements: |
- 220-240v
VAC, 50Hz; 110-115v 60Hz
|
| Current
Rating |
9 amps typ |
- Erasure
Depth:
|
- -
75dB on 1500 Oe Tape, - 90dB on 750 Oe
|
| Degaussing
Force: |
5100
gauss (60Hz) 7000 gauss (50Hz) |
| Duty
Cycle: |
Non-continuous
/ 20% per hour |
|
Throughput
per Hour:
|
20
hard drives/DLT taper per hour typical. 40 VHS cassettes per hour
typical |
| Controls: |
Mains
On/OFF switch; Key switch - optional in US |
| Indicators: |
Mains
On/Off. Erase Field |
| Dimensions: |
Height:
6" (150mm) Width: 16.5" (420mm) Depth:19"(480mm) |
| Weight: |
77lbs
(35kgs) |
| NATO
Numbers |
5836-99-591-3345
(50Hz) / 5836-99-500-5299 (60Hz) |
| |
We reserve the right to
ammend this specification without notice |
|
